Evergreen Speedway

Friday, February 4, 2011

2011 Evergreen Speedway Race Schedule Update Closed for DIRT CUP 40

2011 Schedules
Feb 14th to Mar 11th	Track Repairs and facilities upgrades
	Monday & Tuesday's Track Maintenance February 28th to October 4th
	Every Wednesday March 2nd to October 5th / Karting
	Every Thursday March 10th to September 29th Open Practice*
March 12, 2011	3/8's Open Practice
March 13, 2011	Open for Track rental
March 19, 2011	3/8's Open Practice
March 20, 2011	Evergreen Drift Open Practice
March 26, 2011	5/8's Practice
March 27, 2011	Tentative 8 Hour Enduro
March 31, 2011	5/8's Practice
April 1, 2011	WWRA
April 2, 2011	OPENER - NSRA Winged Sprint Cars ( Rain date June 25th )/ ARCA Late Models 125 with NW NASCAR & Open Super Late Models ( Rain date May 14th ) / Debut V8 Extremes / Stinger 8's
April 3, 2011	Evergreen Drags
April 9, 2011	CUB SCOUT NIGHT! Mr. Dizzy Stunt Show / Hornets / V8 Extreme /Roll Over Contest / DEMO DERBY / FIREWORKS SHOW Scouts in FREE!
April 10, 2011	Evergreen Drift
April 15, 2011	WWRA
April 16, 2011	NASCAR Season Opener! Super Late Models 50/ Street Stocks 50 / Mini Stocks 50 /Super Figure 8 50/Stinger 8's FAN APPRECIATION NIGHT $11.00 Adults / $7.00 Youth & Teens 6 and under free
April 17, 2011	Drift School
April 23, 2011	US ARMY ExTreme Night #1 /Super Figure 8--100 ! / Stingers Double Points / Hornets / V8 Extreme / SMALL CAR DEMO DERBY! All Kids 10 and under Free!
April 24, 2011	Closed Easter Sunday
April 30, 2011	Car Sponsor Appreciation Night ! NASCAR Super Late Model / Street Stocks / Mini Stocks /Hornets / Stinger 8 100! Car Sponsors FREE
May 1, 2011	Evergreen Comp Drift / Grassroots / Pro Am Round #1
May 6, 2011	WWRA
May 7, 2011	60 MINUTES of FEAR / Stingers / V8 Extreme / Mini Stock Twin 30 / Legends/ Mom's in FREE!
May 8, 2011	Evergreen Drags
May 13, 2011	Evergreen Drags
May 14, 2011	NASCAR Double Points Super Late Models TWIN 50/ TWIN 30 Street Stocks/ Scouts HORNET NATIONALS/ All SCOUTS in Uniform FREE!
May 15, 2011	Evergreen Drift
May 20, 2011	WWRA
May 21, 2011	ARMED FORCES NIGHT! NW Pro Trucks /Stinger 8/ NASCAR Double Points Super Figure 8/ V8 XTREME / NASCAR Mini Stocks ALL Active Military and Family FREE!
May 22, 2011	Evergreen Drags
May 27, 2011	Evergreen Drags
May 28, 2011	Whelen NASCAR Night Super Late Model Twin 50's (5/8's) Street Stocks Twin 25 5/8's / Mini Stock 50 / Wash Midget Racing Assoc.
May 29, 2011	Mr. Dizzy/Hornets / DEMO DERBY /Bus Races / Fire Stunts / World Record Jumps / Fireworks!
June 3, 2011	WWRA
June 4, 2011	Seniors Tribute Night! Mid Season Championship NASCAR Super Late Model CHALLENGE 50--5/8's / Stinger 8 / V8 Extremes/ Legends All Seniors (62+) FREE!**
June 5, 2011	Evergreen Comp Drift / Grassroots / Pro Am Round #2
June 10, 2011	Drags
June 11, 2011	US ARMY NIGHT! Mid Season Championships! NASCAR Street Stock Twin 30 / Mini Stock Twin 25 /Stinger 8 / Hornets / Super F8 Twin 50's
June 12, 2011	WWRA
June 17, 2011	Evergreen Drags
June 18, 2011	CLOSED FOR DIRT CUP 40TH ANNIVERSARY!
June 19, 2011	Evergreen Drift
June 24, 2011	WWRA
June 25, 2011	NSRA - Rory Price Memorial / Late Model Challenge / NASCAR SLM & Open Motor SLM- Combined- Twin 75's 5/8s /V8 Extremes /Hornet 100 Invitational
June 26, 2011	Evergreen Drags
July 2, 2011	DRIFTING FESTIVAL
July 3, 2011	DRIFTING FESTIVAL
July 4, 2011	USA Birthday Bash -- Stinger 8 /Hornets / V8 Extreme / DEMO DERBY / FIREWORKS! / Roll Over / Bus and Boat/ Mr. Dizzy
July 8, 2011	NASCAR West Block Party / Car Shows / Parade of Haulers / Live Bands / Autograph Sessions ALL FREE!
July 9, 2011	Les Schwab Night! NASCAR West Qualifying, NW Pro 4 Trucks, Outlaw Compacts, Outlaw Street Stocks / NASCAR Double Points Street Stocks /NASCAR Double Points Mini Stocks/ PRO 4 Alliance ( ALL on the 5/8's )!!
July 10, 2011	NASCAR WEST K&N RACE 200 / NASCAR Super Late Model GM Crate Nationals 100 (5/8's) SPEED CHANNEL
July 15, 2011	WWRA
July 16, 2011	ExTREME NIGHT #2 NWOF8/ V8 Extremes Double Points / Stinger 8's /HORNETS / ROLL OVER/ "*OUTLAW" FULL SIZE DEMO DERBY! Harley Night on the Track! All Riders in FREE!**
July 17, 2011	Evergreen Drags
July 22-July 23	Formula Drift / Evergreen Comp Drift Pro AM Round #3
July 24, 2011	Evergreen Drags
July 29, 2011	WWRA
July 30, 2011	Sponsor Tribute Night-50's Tribute! NASCAR Super Late Model Twin 50 / Street Stock Twin 25/ Mini's Stock 50 / Super Figure 8 /Hornets/Legends 50'S Car Show! Age 50+ $7.00
July 31, 2011	Evergreen Drags
August 5, 2011	Evergreen Drags
August 6, 2011	ExTreme Night #3 NASCAR Super Figure 8 -50 / Prelude to Nationals / STINGER 8 "100" INVITATIONAL / V8 Extreme 50 / HORNET "100" INVITATIONAL ROAD RACE! KIDS 12 and under FREE!
August 7, 2011	Evergreen Drift
August 12, 2011	WWRA
August 13, 2011	NASCAR Super Late Model Twin 50 / Street Stocks Twin's/ Mini's Twin 30 / V8 Extremes / Drift Exhibition* LADIES IN FREE NIGHT!**
August 14, 2011	Evergreen Drags
August 19, 2011	WWRA
August 20, 2011	FIGURE 8 NATIONALS /Street Stocks/ Mini Stocks / Stinger 8 / Hornets Double Points
August 21, 2011	Evergreen Drags
August 25, 2011	Evergreen Fair Opener! KIDS Night! TRUCK & SMALL CAR DERBY / World Record Twin Truck Jumps! / Monster Truck Crush Contest/ Fireworks! Under 8 FREE!
August 26, 2011	Evergreen Fair XXX- Treme Motorsports Mania / Jumps / Stunts / SNOWMOBILES? QUADS? BIKES! / SURPRISE TV GUESTS! WORLD FAMOUS PERFORMERS!
August 27, 2011	HOT AUGUST NIGHTS SHOOTOUT ! On the BIG 5/8's ARCA WEST 200 / Nascar Super Late Models & NW Open Super Late Models/ Legends /V8 Extremes Twin's / EVERGREEN STATE FAIR
August 28, 2011	Evergreen Comp Drift / Grassroots Round #3 / Pro AM Round #4 EVERGREEN STATE FAIR
September 2, 2011	FAIR CONCERT presented by Evergreen Speedway / Artist TBA
September 3, 2011	EVERGREEN STATE FAIR: NASCAR / GM CRATE ALL STAR INVITATIONAL SHOOTOUT! 5/8's/ Outlaw Compacts / MINI STOCKS INVITATIONAL / Street Stocks/ Super Figure 8/ Stinger 8's
September 4, 2011	Mr. Dizzy Night! DEMO DERBY/ ROLL OVER CONSTEST/ HORNETS /V8 XTREMES / FIRWORKS/ MR. DIZZY EVE OF DESTRUCTION!
September 5, 2011	WWRA
September 9, 2011	Drags
September 10, 2011	First Responders Tribute - NASCAR Super Late Model 50 / Street Stocks / Mini Stock / V8 Extreme Mini-Enduro! All Fire / Police / EMT / Free
September 11, 2011	Evergreen Drift
September 16, 2011	WWRA
September 17, 2011	Super Figure 8 Championship 50 / Stinger 8 Championship 50 / Hornet Championship 50 / Extreme V 8's Championship/Legends
September 18, 2011	Evergreen Comp Drift Finals / Grassroots Round #4 / Pro AM # 5
September 23, 2011	Evergreen Drags
September 24, 2011	FOSTER PRESS PRESENTS : CHAMBER NIGHT! NASCAR Super Late Model Championship 100 / NASCAR Street Stocks Championship 50 /NASCAR Mini Stock Championship 50/ NW Pro 4 Trucks
September 25, 2011	Evergreen Drags
September 30, 2011	Evergreen Drags
October 1, 2011	SEASON FINALE Demo Deby / Roll Over Contest / Fireworks /Mom's Mini -Van / Bus Races Mr. Dizzy Extravaganza! STINGER/HORNET SEASON SHOWDOWN ENDURO! Season Ending Food Drive!
October 2, 2011	Evergreen Drift
October 9, 2011	Evergreen Drags
October 16, 2011	Evergreen Drags
October 23, 2011	Evergreen Drags
October 29, 2011	Evergreen HALLOWEEN Drift
	RULES FOR OPEN MOTOR COMPETITION FOLLOW THE FALL CLASSIC: GM CRATE / OPEN MOTORS
	Purses / Entry Fees / Pre Registration / Start Money / will all be available soon. Race on…..

Car-- DEMO DERBY CLARIFICATIONS

One amendment to the 2011 CAR DEMO DERBY RULES:

No Imperials
No Hearses
No Ambulances
No Pickups
No 4x4's
No Tanks
No Strykers
No Locomotives...etc.

Thursday, February 3, 2011

Anyone Ready for an 8 Hour Enduro at the end of MARCH?

How about we have a little fun before the NASCAR season kicks off?    Simple rules. Simple safety features. Simply have some fun!   8 Hours / 3 drivers: 1st- $3000 2nd- $2000 3rd- $1000

                                                    4th $750    5th- $500      6th- $400

                                                      7th to 10th $250   11th to 15th $200   16th to 20th--$100


Sunday race   10am to 6pm

Give me your thoughts! evergreenrules@hotmail.com!

2011 Street Stocks

Performer or Victor Jr. manifolds are allowed for the 2011 racing season.

PERFORMER� MANIFOLDS (Idle to 5500 rpm)
Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands. This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range. Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. There are EGR and non-EGR versions available for most domestic V8 and some V6 engines. Most Performer intakes are 50-state street legal, when used with the correct carburetor and in the correct application. Check the individual listings for detailed information.

Chevrolet 262-400 Small-Block V8
VICTOR JR. (3500-8000 rpm)
These versatile manifolds are excellent for many applications from high-performance street to drag/circle track racing. They provide maximum performance for engines with standard port location, iron and aluminum cylinder heads. The low-profile of the #2975 works well in applications with minimal hood clearance and where 1" or 2" spacers can be used for performance tuning. When carb spacers are not allowed, the #2999 should be used. The Victor Jr. Port Matched manifold has CNC-blended port exits that match any competition head using Fel-Pro gasket #1205.

2011 Demo Derby Rules ----Lots of races this year! Even an "Outlaw Derby"

2011 Demo Derby Construction Rules

Section 1 Car Preparation

(a)

All glass, including windshield, must be removed.

(b) Flammable materials inside the car must be removed. These include the carpet, the rear seat, and interior trim including side and roof liners. Trunks must be free from any debris. As well, the inside of the doors must be clear of all glass and debris.

(c) All light covers/bulbs, side mirrors, hubcaps, grills, side chrome, plastic, door handles and pot metal must be removed.

(d) All trailer hitches, related brackets, reinforcements and hardware will be completely removed.

(e) Stock fuel tanks must be removed.

Section 2 Fuel Systems

(a) A limited capacity (of 6 gal. or less) metal tank or boat tank is required as a replacement gas tank. You must solidly mount it in interior of the car, ahead of the rear axle. The tank must be located at least 12” from the inner door panels. The stock tank must be completely removed. If using a metal boat tank, you must have it placed in a metal frame and securely fastened with metal strapping or chain. NO PLASTIC TANKS!!

(b) Gas lines and fittings must be leak proof. No exceptions. Rubber fuel lines located inside the passenger compartment must run through a second larger hose such as a garden hose to prevent accidental spillage on the driver in case of a leak. A hole must be made in the floor board for fuel runoff.

(c) Electric fuel pumps are optional. If an electric fuel pump is used, you must have an on/off switch that is positioned so that up is on and off is down. The switch must be easily visible and "off" must be clearly marked. The letter "E" must be on your signboard.

(d) Gas tanks may not be bolted to the frame in any fashion. Gas tanks MAY not be used as a kicker to keep the frame from dropping or moving forward or backward.

Subject to Tech Approval

Section 3 Batteries

(a) Batteries must be re-located inside the car. Your battery box must be of metal construction, full enclosed, and securely fastened to the floor. In NO way may it be connected/bolted to the frame. The lid must be securely fastened shut using 5/16" bolts or 2" straps. (I.e. seat belts). NO RATCHET STRAPS OR BUNGEE CORDS OF ANY TYPE.

(b) Two (2) batteries maximum

(c) Switches or wires used for powering off the car must be within reach of the driver while harnessed in. There will be no acceptable excuse for not being able to turn off your car in an emergency situation.

Section 4 Safety Bracing

(a) A front cross brace must be installed above the steering column from window post to window post (in the former position of the dashboard). It must be made of a minimum 2" pipe or square tubing with 1/8" wall thickness and be securely fastened into position. The dash bar in no way may touch or be bolted to the floor or the frame of the vehicle. If a 2 piece pipe is used, it must be securely fastened so that it cannot collapse. (Welded or minimum 3/4" bolt)

(b) A rear cross brace must be installed from door inner skin to door inner skin, as close to the door post(B pillar) as possible, and at least halfway up from the floor. It must be made of a minimum 3" pipe or square tubing, with plates welded on the ends. The end plates may not extend more than 15" past cross bar (towards rear of car). The cross brace must be bolted with minimum of two (2) ¾" bolts per side, extending through the side irons. If the cross brace is collapsible, it must be pinned with a ¾" bolt (minimum) or welded so it can’t rotate. Optional: If floor boards are rusty, you may run MAX 2" Pipe or square tubing over to the inner rocker panel sheet metal. It must be welded, no bolting of this bar! This bar MAY NOT be welded to the frame!!

(c) All cars must have a minimum of 1 upright (vertical) post. Upright must be located directly behind the driver's seat. The upright must be made of a minimum 2" pipe or square tubing with a minimum 4" x 4" plate welded to the top. The upright will extend from the roof to the cross bar, or to the floor and be located as close to the seat as possible. It must be attached with minimum of two 3/8" bolts on each end. Note: If using a two-piece upright, the female end should be above the helmet level, unless the upright is welded or solidly pinned with a ¾" minimum bolt. Optional: May add 2nd upright on passenger side of vehicle. Uprights may in no way be connected to the frame.

(d) Both front doors must be reinforced with a minimum 8" wide, 3/16" thick channel iron. The side iron must not be more than 6’ in length and must begin ahead of the front door seam and be no more than 6" in front of the front door seam. The iron must be bolted with a minimum of three (3) bolts (3/4" min) that extend through the inner panels. Backing plates (washers) must be used and must be a minimum of 6" x 6" x 3/16" thick on both front and rear ends of the door bars. The front bolt must be located no further back than the front fender/front door seam and at least one other bolt must go through the plate connected to the rear cross bar. The ends of the side irons must be cut at a 45-degree angle.

Section 5 Seat and Seat Belts

(a) Approved safety harnesses are mandatory. They must be mounted to stock mounts or have a 2" minimum flat washer where it is mounted through the sheet metal.

(b) Seat can be OEM stock of any make/model car (Honda Prelude/CRX seats not recommended). Put a headrest on upright behind the seat if seat was not equipped with a headrest. (Mandatory)

Section 6 Building, Welding & Securing

THERE WILL BE NO OTHER WELDING OTHER THAN WHAT IS STATED BELOW. IF YOU HAVE A QUESTION ABOUT WELDING, PLEASE CALL THE HEAD TECH OFFICIAL!! IF WELDING IS FOUND ON THE FRAME OR SHEETMETALTHAT IS NOT SPECIFIED BELOW, YOU WILL BE ASKED TO CUT OR LEAVE!

(a) Doors: You may fully weld the doors. You may use filler no larger than 2"w X 1/8"t or 3/8" re-bar or equivalent. If bolting the doors shut, you may use up to 4 1/2" bolts per door. If chaining the doors shut, you may use 2 chains, no larger than 3/8” per door.

(b) Trunk lids, tailgates and hoods must be secured shut with bolts, chains or welds as follows:

(c) Hoods can be bolted in a maximum of 6 places other than stock. Bolt size must be a minimum of 5/8" and a maximum of 1". Only 2 bolts, in an area on either side of the radiator can extend through the frame. MAX plate size is 6" x 6". Bolts must not exceed 4" above the vehicle surface. HOODS MUST BE OPEN FOR TECH!! NO EXCEPTIONS

(d) Chains must be a minimum 3/8" & maximum of 1/2" welded type. A bolt no smaller than 3/8" & maximum of 1/2", with washers, must connect the chains.

(e) Trunks may be fastened in a maximum of 6 places using chains, bolts or welds of which only 2 may go to the frame. Welds cannot be more than 6" long or if using flat plates, they must not exceed 6" x 2"x 1/8" in each place. If bolting, plate size cannot exceed 6''x6''. All thread (1" max) may go through frame or be welded to the side of the frame. Cars must have an inspection hole in the trunk.

(f) Bumper swaps are allowed, however you must use factory hardware (brackets/shocks) that either came with the bumper or came with the car you are putting it on. You MAY NOT use both!! Any questions....call tech.

(g) Front and rear bumpers may be welded solid. (I.e.-bumper to bumper, shock to shock, bracket and bracket to frame) No extra metal.

(h)Bumper shock itself may be collapsed and welded. No added material.

(i)You may weld outer skin to inner structure of bumper.

(j) To simplify most of the bumper welding rule, we are allowing you to weld from the front A-Arms forward. You may only weld the top seam. Width of the weld will not exceed 1/2''.

Section 7 Window / Window Screen

(a) A protective screen of ½" wire mesh or smaller may be installed in front of the driver. A car with a sunroof is allowed as long as the opening is securely covered with sheet metal and deemed safe by tech officials.

(b) One "strap"(max 2) 3/16" thick x 2-1/2" wide flat stock down the center of the windshield from top to bottom. Window bar(s) must be bolted with a minimum of 5/16'' and maximum of 1/2" bolts. Window bars CANNOT be welded in place. No sheet metal screw allowed to fasten window bars.

(c) Optional rear window bars may be added no more than 6" extension on roof and in no way contact the deck lid, trunk pins, trunk plates or frame. They may be no bigger than 2-1/2"x 1/2"

inch thick flat stock. Max 2 each parallel with roof. Window bar(s) will be bolted with a minimum 5/16'' and a maximum of 1/2" bolts. Window bars CANNOT be welded in place. No sheet metal screws to fasten window bars.

Section 8 Radiator

(a) No cooling system other than stock is permitted. Radiators and/or fans can be removed. Expansion tanks must remain in engine compartment as close to the stock location as possible. Radiator support or radiator attachment will be no stronger than stock. Tech decision is final

(b) Transmission coolers other than stock, if used must be in an enclosed box inside the vehicle. Transmission coolers and all hoses must be leak proof. No screw type clamps on any transmission hose connections inside the car.

(c)Transmission coolers may NOT be bolted to the frame in any fashion. Transmission coolers are NOT to be used as a kicker to keep the frame from dropping or moving forward or backward!! Subject to Tech Approval

Section 9 Motor Mounts/ Suspension

(a)Motor mounts and transmission mounts may be strengthened with bolts, welds or chains. Motor straps welded to the frame and bolted to the motor are allowed. Straps can be a maximum thickness of 3/8" flat bar and 2'' wide only and are limited to 2 straps each side. Engine straps may go no further than 3'' in front of forward most part of the cylinder head and no further back than 3'' past the rearward most part of the cylinder head. Engine supports may be used as long as they are not reinforcing the frame. Any questions, call a tech official.

(b) Any 5 lug rear end may be used.

(c)Lower/upper control arms maybe shortened or lengthened to achieve pinion angle. You may NOT reinforce the rear end control arms (trailing arms).

(d)Leaf conversions are NOT allowed. Suspension must remain stock.

Maximum of 9 leafs.

Section 10 Distributor Plates

Distributor plates, no more than 10" may be used. If using motor plate, the 2 may NOT be connected.

Section 11 Exhaust

Stacks must be a minimum of 18" from exhaust port.

Section 12 Carbs

You must have either an air cleaner or suitable flame arrestor. Two large holes, at least 6" in diameter, must be put in the hood for fire extinguisher access. Stack holes are acceptable for fire access holes. No alternative starting methods i.e. stating fluid etc....

Section 13 Brakes

Cars must have a minimum of two working hydraulic brakes.

Section 14 Tires/Wheels-Tie-Rods

(a) Any tire may used. Doubled and forklifts are ok. Tires must be filled with air and air only.

(d)Valve stem protection is permitted.

(e) Tie rods may be reinforced. Must have stock tie rod ends. No pipe tie rods.

Section 15 Sign Boards/ Flags

(a) Car numbers will be painted on the signboard. Numbers will be at least 18" high and minimum of 2" thick. Signs need to be in contrasting colors such as black numbers on a white background. If the signboard is unreadable, the car will not be permitted to race until it is corrected.

(b) Letter "E" is to be used on all cars with electric fuel pumps.

Section 16 Repairing Damaged Cars

(a) When repairing damaged cars, you may use for two (2) 4''x4''x1/8'' per frame section. Pieces cannot be any closer than 3". They may not attach to each other in any fashion. Repairs pieces must have an inspection hole drilled in the center of plate.

A frame section is one frame rail in front of or behind an OEM firewall. 2 plates RF frame, 2 plates RR frame, 2 plates LF frame and 2 plates LR frame. That's 8 total plates. You may not add any more than this. 2 PLATES MAX PER FRAME SECTION.

Section 17 Misc Can & Can't Do

(b)You may cut firewall for distributor clearance. You must cover with tin.

(c)You may shorten or lengthen the upper and lower control arms for rear end only. NO REINFORCING!!!

(d)You may clamp leaf springs. 4 clamps per leaf. 2"x1/4" MAX. 2 3/8" bolts per clamp

(e)Body mounts may be removed. If replacing bolts, you may use bolts/all thread no larger than 3/4". MAX 3"x3"x1/4" washer/plate. Washer may not cover body mount hole on exterior of frame. Must be able to see in the frame NO EXCEPTIONS!!!

(f)You may re-bolt hood skins. 15 bolts maximum. 3/8''max bolt size. 1" max washer size.

(g)You may re-bolt wheel wells. You are allowed 5 3/8" bolts with 1" diameter washers per wheel well.

(h) Fire extinguishers are NOT mandatory, although highly recommended. If a fire extinguisher is installed in the vehicle, it must be securely mounted and within drivers reach.

(i) You may chain the humps. You will be allowed 1 wrap of chain. It may go around the rear end 1 time and up through the body and around frame 1 time and be bolted together.

(j) You may add two (2) body mounts. No larger than 3/4" bolts/fasteners. MAX washer size is 3"x3"x1/4". Must be brightly painted for easy viewing.

Calling all V8 Cars! V8 ExTreme Class!

2011 Rules and Class info: V8 ExTreme Class will run a full schedule of fan favorite events, such as:
a. Bump to Pass b. Figure 8 c. Road Course d. Last Man Race e Flag Pole Race f. Cat and Mouse

A fan will spin the wheel to decide the race of the night! Wherever it lands--that's the Race.

Details and Rules to follow: Minimum Spec-H post style spreader and uprights mandatory.